View source

From Insulator Wiki (Wikilator)

This page has been locked to prevent editing; there are a number of reasons why this may be so, please see Project:Protected page.

You can view and copy the source of this page:

{{IOTW |number=CD 100 |date=Wed, 26 Mar 2008 | details = The front of the CD 100's are embossed either Surge / Reg. U.S. Pat. Off., or Surge/ T. M. Req. Pat. Pend. The rear skirt is embossed Babson Bros. Co. / Chicago U.S.A. Two variants contain spelling errors for Chicago, reading "Chciago". * {{PicturePoster |id=157566322}} (embossing error) * {{PicturePoster |id=149367288}} (Surge on gate latch) * {{PicturePoster |id=176595712}} (Surges on side pins) Hemingray began production of the Surge insulator in the late 1940s for use on electric fence systems. More details can be found at the following [http://www.insulators.com/shows/handouts/surge.htm link] thanks to the information and research provided by Russ Frank. (Be sure to click on "View Handout".) These brief comments on the Insulator of the Week are not intended to be complete and are presented to encourage discussion and additional information from ICON. Now it's your turn to share info and/or post photos of your favorite CDs 100 Surges! | discussion = {{Comment | name = Keith Roloson | date = Wed, 26 Mar 2008 | comment = {{PicturePoster |id=149367288}} (Surge on gate latch) When I read that I said "huh"? And looking at the link didn't help either. I thought maybe it was decorative, as it didn't look "functional". After all, there was no wire on it! I was going to ask ICON and Russ Frank what it was all about, but saw Russ' PDF link, and there he DOES explain it: "a Safety Gate Latch (a spring type glass insulated gate handle to enable shock-free access in and out of the fenced enclosure)" }} {{Comment | name = Bill Meier | date = Thu, 27 Mar | comment = We believe the full bundle of Surge pins contained 12 pins and no insulators. An example is at {{PicturePoster |id=189979659}} }} {{Comment | name = Andrew Gibson | date = Thu, 27 Mar 2008 | comment = Here's another CD that's interesting to wonder who the manufacturer was. What is the current consensus about who made these insulators? The "REG US PAT OFF" and "T.M. REG. PAT PEND" embossing on these (the CD 100, that is) is ever so typical of Corning, but the drip points are typical of Hemingray. Corning certainly did not make any other insulator with drip points, but virtually all their insulators include "T.M. REG U.S. PAT OFF" or "REG. U.S. PAT OFF" as part of the embossing. Hemingray, on the other hand, did mark some insulators with "REG US PAT OFF" -- though, to the best of my knowledge, just LOWEX insulators. Kevin Lawless published some correspondence with Babson Bros in the Dec 1985 CJOW that says that they believed that the CD 100s were purchased from the Corning Glass Works. [http://cjow.com/archive/article.php?month=12&a=12Surge%20Fencer%20Post%20and%20Insulator.htm&year=1985] John McDougald recounts some stories about the CD 100 in CJOW May 2000, and states that they were made by Hemingray [http://cjow.com/archive/article.php?month=5&a=05Macs%20Believe%20It%20Or%20Not.htm&year=2000] I believe that Woody's "Glass Insulator In America" report also attributes the CD 100 to Hemingray. Jim White in the July 1973 CJOW shows off a CD 100.2 which was found in the Muncie Dump. It is fairly obvious that the 100.2 at least was made by Hemingray. [http://cjow.com/archive/article.php?month=7&a=07Surge%20Insulators.htm&year=1973] One theory is that when Surge originally was looking for a manufacturer, they contacted both Hemingray and Corning. Hemingray produced the CD 100.2 as a prototype, but this is not the style that was chosen. Instead, the CD 100 from Corning was chosen, and Corning then produced the insulator. Of course, it's possible that the 100.2 was an original prototype, and that the 100 was then produced by Hemingray after making changes to the original design. Also of interest, there has been a rumour floating around for many a year in regards to a box of CD 100s that are embossed with an Owens Illinois marking (or is it that the box is marked Owens Illinois?). Just a rumour, of course, but if found to be true, that would fairly definitively answer the question! }} {{Comment | name = Bob Stahr | date = Thu, 27 Mar 2008 | comment = Considering shards of both CD's of Surges were found at various times at known Hemingray dumping locations, I would say they were certainly produced at the Owens-Illinois Glass factory (formerly Hemingray). I suspect the letter from Babson mentioning Corning is just an error, maybe the author was thinking Owens-Corning instead of Owens-Illinois, or were plain guessing. I own an original cardboard box full of the CD 100's. I'll try to take a picture this evening. I'll check the second box that our club owns as well. }} {{Comment | name = Russ Frank | date = Fri, 28 Mar 2008 | comment = I have to agree with Bob, both of my cases of Surge insulators read = Owens-Illinois and are dated 1955. Seems more like a mistake on the writers part. }} {{Comment | name = Bob Stahr | date = Fri, 28 Mar 2008 | comment = Both of mine are 1955 also. I wonder if there are any earlier? }} {{Comment | name = Bob Stahr | date = Fri, 28 Mar 2008 | comment = I posted a few pictures of a rather beat up box of Surges. Our club uses these on our display stations to rope off exhibits. Many of you may have seen the set up at Wheaton, Springfield, OH, or some other midwestern shows. {{PicturePoster |id=211286756}} There is no doubt in my mind that they are Owens-Illinois (Hemingray) products. }} {{Comment | name = Bill Meier | date = Fri, 28 Mar 2008 | comment = Compare * {{PicturePoster |id=211286994}} with * {{PicturePoster |id=211291008}} Hmmm... Very similar! And a shipping label to CENTRAL SURGE SERVICE * {{PicturePoster |id=211291263}} }} }}

Return to Main Page.